| Time | ID # | Authors and Affiliations (Presenter is underlined) |
Title |
| 8:30-9:00 | Registration/Continental Breakfast | ||
| 9:00-9:15 | Opening (F. Dogan and M. Strasik) | ||
Session 1 Status Reports and Material Processing (Co-Chairs: F. Dogan and M. Strasik) | |||
| 9:15-9:45 | A01 | M. Murakami, Superconductivity Research Laboratory, ISTEC | Recent development of bulk high temperature superconductors in Japan |
| 9:45-10:15 | A02 |
D. Cardwell, A. D. Bradley, N. Hari Babu, M. Kambara, IRC in Superconductivity, W. Lo, Texas Center for Superconductivity, University of Houston |
Fabrication, microstructure and characterisation of joins in melt processed YBCO |
| 10:15-10:45 | A03 |
K. Salama, Yu.X.Zhou, W.Lo, T.B.Tang, Texas Center for Superconductivity, University of Houston |
Enhancement in Transport Properties of Seeded Melt Textured YBCO by Cu-site Doping |
| 10:45-11:15 | Coffee Break | ||
Session 2 Material Processing (Co-Chairs: M. Sander and D. Shi) | |||
| 11:15-12:35 | A04 |
S. Nariki, N. Sakai, M. Murakami, Superconductivity Research Laboratory, ISTEC |
Processing of High-performance Gd-Ba-Cu-O Bulk Superconductor with Ag Addition |
| 11:35-11:55 | A05 |
G.J. Schmitz, E.S. Reddy, J.G. Noudem, M. Tarka, ACCESS e.V. Materials and Processes |
Recent developments in processing and properties of superconducting fabrics |
| 11:55-12:15 | A06 |
W. Lo, Y.X. Zhou, T.B. Tang, K. Salama, Texas Center for Superconductivity, University of Houston |
Jc Enhancement by Selective Destruction of Local Superconductivity |
| 12:15-13:40 | Lunch | ||
Session 3 Material Processing (Co-Chairs: D. Cardwell and M. Murakami) | |||
| 13:40-14:00 | A07 |
F. Dogan, S. Sofie, W.C. Hicks, M. Crow, J. D. Reding, Department of Materials Science and Engineering, University of Washington |
Effect of Dopants on Microstructure and Superconducting Properties of YBCO Single Crystals |
| 14:00-14:30 | A08 |
I-G. Chen, S-H. Hsu, Department of Material Science and Engineering, National Cheng Kung University |
Preparation of the C-oriented Nd-Ba-Cu-O/Ag Melt-Growth |
| 14:30-15:00 | A09 |
D. Shi, Y. Xu, A. Ferendeci, S. McClellen, University of Cincinnati |
Development of RF Component using Single Domain YBCO for Wireless Telecommunications |
| 15:00-15:30 | A10 |
G. Krabbes., T. Hopfinger, C. Wende, G. Fuchs, IFW Dresden, P. Diko, IFW Dresden and Slov. Acad.Sci. |
REBaCuO/Ag composites: fundamentals of processing, microstructure, control of properties |
| 15:30-16:00 | Coffee Break | ||
Session 4 Material Processing (Co-chairs: L. Kovalev and W. Lo) | |||
| 16:00-16:20 | A11 |
B. W. Veal, L. Chen, H. Zheng, H. Claus, Argonne National Laboratory |
Joining of Melt Textured YBCO - a Direct Contact Method |
| 16:20-16:40 | A12 |
S-Y. Chen, I-G. Chen, Department of Materials Science & Engineering, National Cheng Kung University, Taiwan |
The Effect of Pd/Pt Addition on the Superconductivity of Sm-Ba-Cu-O Materials |
| 16:40-17:00 | A13 |
S. Sofie, F. Dogan; Department of Materials Science and Engineering, University of Washington |
The effect of carbon rich precursors on the solidification and properties of Y-Ba-Cu-O crystals |
| 18:00-20:00 | Banquet | ||
July 12th, 2001 (Thursday)
| Time | ID # | Authors and Affiliations | Title |
| 8:00-8:30 | Registration/Continental Breakfast | ||
Session 5 Characterization and Properties (Co-chairs: H. Ikuta and G. Krabbes) | |||
| 8:30-9:00 | B14 |
U. Balachandran, Argonne National Laboratory |
Development of High-Tc Superconductors for Electric Power Applications |
| 9:00-9:30 | B15 |
H. Ikuta, CIRSE, Nagoya University |
Pulsed-field magnetization of Sm-Ba-Cu-O bulk superconductors and their application as a superconducting magnet |
| 9:30-10:00 | B16 |
M. Sander, U. Sutter, M. Adam, M. Kläser, Forschungszentrum Karlsruhe GmbH |
Comparison of Pulsed Magnetization Processes for HTS Bulk Parts |
| 10:00-10:30 | Coffee Break | ||
Session 6 Characterization and Properties (Co-chairs: K. Salama and J. Hull) | |||
| 10:30-10:50 | B17 |
A. Køhler, S. Haindl, H. W. Weber, Atominstitut der Oester. Univ., M. P. Delamare, Institut fur Experimentalphysik, Johannes Keppler Univ.; C. Jooss, H. C. Freyhardt, Institut fuer Metallphysik, Gottingen |
Neutron Irradiation Effect on a Single Grain Boundary in Melt Textured YBCO |
| 10:50-11:10 | B18 |
T. Habisreuther, Oleksiy Surzhenko, Matthias Zeisberger, Doris Litzkendorf, Wolfgang Gawalek, IPHT Jena |
Experimental influences on the significance of field-mapping |
| 11:10-11:30 | B19 |
R-P. Sawh, R. Weinstein, D. Parks; Texas Center for Superconductivity at the University of Houston, M. Murakami, N. Chikumoto, Superconductivity Research Laboratory, ISTEC, G. Krabbes, Institute of Solid State and Materials Research, Dresden |
Multiple Pinning Mechanisms by U and Zr Additions in MT-Nd123 |
| 11:30-11:50 | B20 |
H. Ohsaki, T. Shimosaki, N. Nozawa, The University of Tokyo |
Pulse Field Magnetization of a Ring-shaped Bulk Superconductor |
| 11:50-12:10 | B21 |
A. Leenders, H. Walter, Zentrum fuer Funktionswerkstoffe gGmbH, H. C. Freyhardt, Zentrum fuer Funktionswerkstoffe gGmbH; IFM University of Goettingen |
Influence of the composition on the mechanical properties of TSMG YBCO |
| 12:10-13:00 | Lunch | ||
| 13:00-15:00 | Poster Presentations (Chair: B. Balachandran) | ||
| 16:15-22:00 | Cruise | ||
July 13th, 2001 (Friday)
| Time | ID # | Authors and Affiliations | Title |
| 8:00-8:30 | Registration/Continental Breakfast | ||
Session 7 Applications (Co-chairs: S. Nariki and A.Wolsky) | |||
| 8:30-9:00 | C22 |
L. K. Kovalev, Moscow State Aviation Institute, I. I. Akimov, All-Russian Scientific Research Institute of Inorganic Materials, W. Gawalek, Institut für Physikalische Hochtechnologie (IPHT), B. Oswald, Oswald Elektromotoren GmbH |
Electric Machines on the Basis of the Bulk HTS Elements |
| 9:00-9:30 | C23 |
A.M. Campbell, IRC in Superconductivity, University of Cambridge |
Fields and Forces from Magnet Arrays |
| 9:30-10:00 | C24 |
K. Ma, H. Ye, Y. Postrekhin, W-K. Chu, University of Houston |
Effects of Anisotropy in the Magneto-mechanical Responses of Seeded Growth YBCO Samples |
| 10:00-10:30 | Coffee Break | ||
Session 8 Applications (Co-chairs: I-G. Chen and G. Schmitz) | |||
| 10:30-11:00 | C25 |
H. C. Freyhardt, Zentrum fuer Funktionswerkstoffe gGmbH Goettingen; IFM University of Goettingen, B. Bringmann, A. Leenders, H. Walter, Zentrum fuer Funktionswerkstoffe gGmbH |
Processing of HTS tiles for application in energy storage systems and cryotanks |
| 11:00-11:20 | C26 |
M. D. McCulloch, University of Oxford |
Future trends of the application of (RE)BCO in electrical machines |
| 11:20-11:40 | C27 |
T. A. Coombs, A. Cansiz, A. M. Campbell, IRC in Superconductivity |
A superconducting thrust bearing system for an energy storage flywheel |
| 11:40-12:00 | C28 |
M. Muralidhar, M. Murakami, ISTEC-SRL |
Optimization of matrix chemical ratio for highest flux pinning in ternary (Nd-Eu-Gd)Ba2Cu3Oy |
| 12:00-12:20 | C29 |
A. Hu, N. Sakai, M. Murakami, SRL/ISTEC |
Melt processing and enhanced superconducting properties of single domain Sm-Eu 123 superconductors fabricated in air |
| 12:20-13:30 | Lunch | ||
Session 9 Applications (Co-chairs: A. Campbell and K. Ma) | |||
| 13:30-14:00 | C30 |
A. Wolsky, Argonne National Laboratory |
An Overview of Flywheel Energy Storage Systems". Is it compatible with what you've got in mind? |
| 14:00-14:30 | C31 |
John R. Hull, Argonne National Laboratory Mochimitsu Komori, Kyushu Institute of Technology |
High Levitation Pressures with Cage-Cooled Superconductors |
| 14:30-14:50 | C32 |
M. Strasik, A. C. Day, K. E. McCrary, P. E. Johnson, J. A. Mittleider, P. K. McDowell, J.W. Gabrys, M. Higgins, J. R. Schindler, R. A. Hawkins, D. L. Carlson, J. Edwards, Boeing Phantom Works |
Development of 10 kWh Flywheel Energy Storage System with Superconducting Bearings |
| 14:50-15:15 | Coffee Break | ||
| 15:15-16:00 | Awards | ||
| 16:00-16:15 | Closing Remarks | ||