Digests accepted for IEMDC'99
as of April 5, 1999
The digests listed below have been accepted for presentation at IEMDC'99. The Technical Program Schedule has been organized. Papers have been assigned to technical sessions as indicated below.
| Paper Reference # |
Technical Session |
Paper Title | Authors |
| 1000 | WP1 | RBF Identifier and Pole-Shifting Controller for PSS Application | G. Ramakrishna, O.P. Malik |
| 1002 | WO6 | Analytical Model for Permanent Magnet Motors with Surface Mounted Magnets | A.B. Proca, A. Keyhani, A. El-Antably |
| 1003 | TO6 | A Novel High-Power-Density Hybrid Reluctance Motor with Field Concentration for Vehicle Direct Drive | D. Hadjidj, A. Miraoui, J.M. Kauffmann |
| 1004 | MP2 | Performance Analysis of a Self-Regulated, Self-Excited, Brushless Three-Phase Synchronous Generator | T. Fukami, T. Kondo, T. Miyamoto |
| 1010 | MO1 | Evaluation of Inverter and Motor Losses in Adjustable Speed Drive Applications with Long Motor Leads | M. Holmes, A. von Jouanne, A.K. Wallace |
| 1011 | TP1 | A New Approach of the Three Phase Mono-Axial Unconventional Windings for A.C. Machines | M.V. Cistelecan |
| 1012 | MO2 | Dynamic Analysis of Synchronous Motor Using Vector Diagrams | O.S. Lobosco |
| 1013 | MP1 | SV Theory of Permanent Magnet Excited Synchronous Motor | S. Yamamura |
| 1014 | TP1 | Parameter Estimation of Single-Phase Induction Machines | A.A. Jimoh, O. Omozusi, O. Ojo |
| 1015 | WO6 | Influence of Magnet Dimensions on the Performance of a Single-Phase Line-Start | A.M. Knight, S. Williamson |
| 1017 | TO4 | Modeling and Simulation of Electric Drive Systems using MATLAB/SIMULINK Environments | A. Dumitrescu, T. Jokinen, M. Rosu, D. Fodor, S. Bucurenciu |
| 1018 | MO1 | Load Testing of Induction Machines Without Torque Measurements | I. Boldea, L. Chris, A.K. Wallace |
| 1019 | TP1 | Field Evaluation of Efficiency and Prediction of Steady State Performance for Induction Motors Based on Equivalent Circuit Methods | O.V. Thorsen, M. Dalva |
| 1021 | WP2 | 80C196MC Microcontroller-based Inverter Motor Control and IR2130 Six-output IGBT Driver | T. Yiliang, C. Wenjin |
| 1022 | WP1 | Modelling and Simulation of Electric Submersible Pumps | O.V. Thorsen, M. Dalva |
| 1023 | WP2 | Analysis of a Voltage Regulator for a Two-Phase Induction Motor Drive | M. Popescu, T. Jokinen, E. Demeter, D. Micu |
| 1024 | TP2 | Modeling and Analysis of a Two-Phase Induction Machine with Non-Orthogonal Stator Windings | M. Popescu, T. Jokinen, E. Demeter, V. Navrapescu |
| 1025 | TO2 | Monitoring and Diagnosis of Induction Motors Electrical Faults Using a Current Park's Vector Pattern Learning Approach | H. Nejjari, M. Benbouzid |
| 1026 | TO4 | A SVM Algorithm for Torque Control of Inverter Fed Induction Motor Drive | C. Attaianese, F. Parillo, A. Perfetto, G. Tomasso |
| 1027 | MP1 | A Synchronous / Permanent Magnet Hybrid AC Machine | X. Luo, T.A. Lipo |
| 1029 | MO2 | A General Design Model for Electric Motors | M. El-hami, S. Abu-Sharkh |
| 1030 | TP1 | Approach of Saturated Induction Machine Modeling by Means of HG-Diagram | M.S. Nait-Saïd, M. Benbouzid, H. Nejjari, N. Nait-Saïd |
| 1031 | TP1 | Improvement of Monitoring and Diagnosis of Broken Bars/End-Ring Connectors and Airgap Eccentricities of Squirrel-Cage Induction Motors in ASDs Using a Time-Stepping Coupled Finite Element-State Space Technique | J.F. Bangura, N.A. Demerdash |
| 1032 | TP1 | Effects of Broken Bars/End-Ring Connectors and Airgap Eccentricities on Ohmic and Core Losses of Induction Motors in ASDs Using a Coupled Finite Element-State Space Method | J.F. Bangura, N.A. Demerdash |
| 1033 | WO1 | A Novel Spherical Linear PM Motor for Direct Driving Infrared Optical Telescope | M. Anders, E. Andresen, A. Binder |
| 1034 | TO5 | Large Band Reduction of Magnetic Vibrations of Induction Machines with "Breaking of Impedance" Interface | L. Durantay, F. Laurent, Y. Messin, V. Kromer |
| 1035 | WP1 | Design of Robust Non-linear Control for Power Systems | A. Halim, K. Takahashi, B. Kermanshahi |
| 1036 | WO4 | Electrical Environments in Aerospace Applications | A. Brockschmidt |
| 1037 | TO3 | Ontario Hydro Experience with Generator Rotor Forging Cracks at the Winding Slot Tooth Roots | G. Klempner |
| 1039 | TP1 | A New Approach for the Analysis of Three Phase Self-Excited Induction Generators | K.F. Ali, A.I. Alolah |
| 1040 | TP2 | Using MATLAB-Simulink for Transient Analysis in Synchronous Machines | D.L. Querrey, C.A. Gross, P.P. Reichmeider, D. Novosel, S.J. Salon |
| 1041 | WP2 | Subharmonics and Chaos in Switched Reluctance Motor Drives | K.T. Chau, J.H. Chen, C.C. Chan, Q. Jiang |
| 1042 | WP1 | Neuro-Fuzzy Dual-Mode Control of Travelling-Wave Ultrasonic Motors | S.W. Chung, K.T. Chau, C.C. Chan |
| 1043 | MP1 | Static Characteristics of a New Doubly Salient Permanent Magnet Motor | M. Cheng, K.T. Chau, C.C. Chan |
| 1044 | TP1 | Current Monitoring for Detecting Inter-Turn Short Curcuits in Induction Motors | A. Stavrou, H.G. Sedding, J. Penman |
| 1045 | TO4 | Working Regions of Adjustable-Speed Units with Doubly Fed Machines | L. Schreier, M. Chomát, J. Bendl |
| 1046 | WO6 | Improved Analysis of a Bearingless Switched Reluctance Motor | M. Takemoto, H. Sukzuki, A. Chiba, T. Fukao, M.A. Rahman |
| 1047 | TP2 | Space Phasor and FEM Models of Synchronous Reluctance Machine | M. Chomát, L. Schreier, I. Dolezel |
| 1048 | TP1 | Variation of Direct and Quadrature Axis Inductances of Single-Sided Linear Reluctance Motor | B. Stumberger, A. Hamler, B. Hribernik |
| 1049 | WP2 | A Simple Linear Adaptive Speed Control of Energy Efficient DC Drives | F. Gajendran, S. George |
| 1050 | WO6 | Demagnetisation State of Permanent Magnets in Large Output Power Permanent Magnet Synchronous Motor | M. Rosu, A. Arkkio, T. Jokinen, J. Mantere, J. Westerlund |
| 1052 | WP2 | Variable-Frequency Starting of Squirrel Cage Induction Motors | G.W. Staats |
| 1055 | MO2 | Thermal Management of AC Induction Motors Using Computational Fluid Dynamics Modeling | C. Liao, C. Chen, T. Katcher |
| 1056 | MP2 | Exact Tracking by Dynamic Field-weakened PMAC Servodrive | B. Grcar, P. Cafuta, L. Kumin, D. Dolinar |
| 1057 | WO1 | Looking into the Implementation of AC Motor Control on a Fixed Point Processor | H. de la Vallée Poussin, D. Grenier, F. Labrique, J. Legat |
| 1058 | MP2 | Stability Analysis of Sensorless Permanent Magnet Synchronous Motor Drive with Reduced Order Observer | D. Hamada, K. Uchida, F. Yusivar, H. Haratsu, S. Wakao, T. Onuki |
| 1059 | TO5 | A Novel Approach to Design Optimization of Ventilation Holes in Induction Motors | T. Onuki, S. Wakao, M. Tokuhisa, A. Maeda |
| 1060 | TO2 | A New Method of Motor Speed Estimation Using Fuzzy Logic Algorithm | F. Yusivar, D. Hamada, K. Uchida, S. Wakao, T. Onuki |
| 1061 | TO2 | ANN-Based Speed and Current Controllers for an AC-DC Converter Fed DC Drive System | S. Deghedie, M. Naguib, T. Abdelhamid, M. Rashad |
| 1065 | MP2 | Calculation of Two-Axis Parameters of Synchronous Motor with Permanent Magnets Using Finite Elements | B. Stumberger, B. Hribernik |
| 1066 | WO1 | Generic Torque-Maximizing Design Methodology of Permanent Magnet Vernier Machine | A. Toba, T.A. Lipo |
| 1067 | MO3 | Adjustable Speed Drive Surges: How They Affect Motor Stator Windings | G.C. Stone, S.R. Campbell, H.G. Sedding |
| 1068 | TP1 | Steady-State Analysis of an Isolated Self-Excited Induction Generator Supplying an Induction Motor Load | S.M. Alghuwainem |
| 1069 | WO6 | High Speed Control Scheme of Flux Reversal Machine | C.X. Wang, S.A. Nasar, I. Boldea |
| 1070 | MP2 | Effects of Damper Windings on Negative-Sequence Components Under Line-to-Line Fault Conditions | J. Matsuki, T. Katagi, T. Okada |
| 1071 | TP2 | Application of Permanent Magnet Machine for Hygen - Novel Adjustable Speed Generating System with Constant Frequency Output Voltage | M. da Ponte, L. Grzesiak, W. Koczara |
| 1073 | WO1 | Sensorless Initial Rotor Position Estimation of Surface Permanent Magnet Synchronous Motor | S. Nakashima, Y. Inagaki, I. Miki |
| 1074 | TP1 | Induction Motor's Contribution to Short Circuit Current | Z. Maljkovic, M. Cettolo, M. Pavlica |
| 1075 | TP1 | Transient Analysis of a Two Speed Synchronous Induction Motor | M.A. Badr, A.I. Alolah, A.F. Almarshood |
| 1078 | TP1 | Analysis of Supply Voltage Distortion Effects on Induction Motor Operation | A. Vamvakari, A. Kandianis, A. Kladas, S. Manias, J. Tegopoulos |
| 1079 | TO1 | Noise Reduction of Switched Reluctance Machine | M. Gabsi, F. Camus, T. Loyau, J. Barbry |
| 1080 | TO6 | Induction Machine Alternative for Automotive Alternator and Starter | R.F. Wall, H.L. Hess |
| 1081 | WP2 | Single-Phase DC Drive System Controlled by Sinusoidal PWM Full-Bridge DC-DC Converter with Improved Input Current Waveform | T. Abdelhamid |
| 1082 | WP2 | Transformerles Capacitive Coupling of Gate Signals for Series Operation of Power MOS Devices | R. Baker, H.L. Hess |
| 1083 | WP2 | Development of a Low-Cost CSI-Fed Self-Controlled High-Voltage Synchronous Machine Drive System | C. Wang, L. Xu |
| 1084 | TP1 | A Novel Method Measuring Induction Machine Parameters Based on Digital Signal Processing | C. Wang, L. Xu |
| 1085 | WO2 | Computer Aided Simulation of Performance and Brush Commutation for Universal Motors with Two Coils per Armature Slot | R.H. Wang, R.T. Walter |
| 1086 | WO2 | Laminated Steel Eddy Current Loss versus Frequency Computed Using Finite Elements | J.R. Brauer, Z.J. Cendes, B.C. Beihoff, K.P. Phillips |
| 1087 | MP1 | µ Controller Based PLL Control for SR Drive | J. Ahn |
| 1088 | MP2 | Design Optimization of Round-Rotor Synchronous Machines Operating on Non-sinusoidal Voltages | L. Pereira |
| 1089 | MP2 | Inverse Modelling of Non-Sinewave Synchronous Reluctance Motors | G. Sturtzer, D. Flieller, M. Gabsi |
| 1091 | TP2 | Combined Simulink-Finite Elements Approach to Inverter Driven Induction Motor | A. Dumitrescu, F. David, T. Jokinen, M. Rosu |
| 1092 | TO2 | An Adaptive Speed Control for Induction Motor Drive Using Fuzzy Neural Network Based on Fuzzy Hierarchy Error Approach | A. Wu, P. Tam |
| 1093 | WO6 | Design and Optimization, Steady-State and Dynamic Analysis of Synchronous Reluctance Motors Controlled by Voltage-Fed Converters with Nonlinear Controllers | S.E. Lyashevskiy, A. Nazarov, A. El-Antably, C. Yokomot, A. Sinha, M. Rizkalla, M. El-Sharkawy |
| 1095 | MP2 | Forced Vibrations Calculation in a Switched Reluctance Motor Taking into Account the Viscous Damping | C.G. da Costa Neves, N. Carlson, N. Sadowski, J.A. Bastos, N.S. Soeiro |
| 1098 | WO4 | High-Frequency Characterization of Power Wiring for Modeling | E.J. Woods |
| 1100 | MP2 | Dynamic Modeling of Permanent Magnet Synchronous Machines Using Direct Coupled Time Stepping Finite Element Method | S.L. Ho, H.L. Li |
| 1101 | WP1 | Analysis of Indirect Temperature-Rise Methods of Induction Machines Using Time Stepping Finite Element Method | S.L. Ho, W.N. Fu |
| 1102 | WP2 | Adjustment of Step Size for Time Stepping Finite Element Analysis on Skewed Rotor Induction Motors Fed by SPWM Source | S.L. Ho, H.L. Li |
| 1103 | TO4 | Practical Experience in Industrial Drive Applications Using Model Based Estimation Algorithms for Measurement and Control | M. Lauzi |
| 1104 | TO3 | ABB Generator Winding Design Based on 25 Years Experience at Amos | R. Zimmerli, J. Michalec, J. Oliver, N. Krick, A. Huber |
| 1106 | TO3 | Mechanical Behavior of Hydrogenerator Endwindings | A. Foggia, A. Jarosz, J. Adam, P. Charbonnier |
| 1107 | WP2 | An Optimised Variable Structure Control of a Shunt Active Filter | K. Sahnouni, H. Godfroid, A. Berthon |
| 1109 | TO3 | Modelling the Influence of External Residual Harmonic Over the Three-Phase Short-Circuit Transient Electromagnetic Processes in a Cylindrical Rotor Synchronous Generators | P. Nicolae |
| 1110 | WP1 | Quality Norms for Steady State and Transient Short-Time Variation of Supply Voltages and Frequencies in Presence of Distorting Loads for Networks with Localised Power | P. Nicolae |
| 1112 | MP2 | PM Linear Synchronous Motors Lateral Force Calculation | F. Profumo, A. Tenconi, G. Gianolio |
| 1113 | TO5 | An 1-D.O.F. Controlled Attraction Type Magnetic Bearing | I.D. Silva, O. Horikawa |
| 1114 | WP1 | Analysis of Shaft Voltages in Large Synchronous Generators | J. Torlay, C. Corenwinder, A. Audoli, J. Herigault, A. Foggia |
| 1115 | WP1 | Induction Machine Flux Observers: Toward a Unified Classification | C.M. Ritter |
| 1116 | TO6 | Hybrid Electric Vehicle with Permanent Magnet Traction Motor | L.U. Gökdere, C.W. Brice |
| 1117 | MP2 | Adaptive Servo Drive Using a Permanent-Magnet Synchronous Motor and the TMS320C30 | M. Ghribi, H. Le-Huy, F. Tourkhani |
| 1118 | MP1 | Direct Torque Sensorless Control for Switched Reluctance Motor Drives | P. Luk, P. Jinupun |
| 1119 | MP1 | Performance of Interior Permanent Magnet Motor Drive over Wide Speed Range | M.N. Uddin, T.S. Radwan, M.A. Rahman |
| 1120 | WO2 | Improved Steady-State Analysis of Interior Permanent Magnet Synchronous Motor Drive | T.S. Radwan, M.N. Uddin, M.A. Rahman |
| 1122 | MP1 | Analytical Prediction of Magnetic Field from Surface Mounted Permanent Magnet Motor | K.F. Rasmussen |
| 1123 | WO5 | Large Air-Cooled Turbogenerators: Design Features and Operating Experience | R. Joho, R. Zimmerli |
| 1124 | WP1 | A Ruled-Based Acceleration Control Scheme for an Induction Motor | K.L. Shi, T.F. Chan, Y.K. Wong, S.L. Ho |
| 1126 | TO3 | Application of a Solid-State Controllable Series Capacitive Reactance to Improve the Transient Characteristics of a Synchronous Generator | B.S. Rigby, R.G. Harley |
| 1127 | TP2 | A Continually Online Trained Artificial Neural Network Identifier for a Turbogenerator | G.K. Venayagamoorthy, R.G. Harley |
| 1128 | TO2 | Sensorless Adaptive Neural Network Control of Permanent Magnet Synchronous Motors | T. Liu, M. Elbuluk, I. Husain |
| 1129 | MP1 | Fault Analysis and Excitation Requirements for Switched Reluctance Generators | I. Husain, A. Radun, J. Nairus |
| 1130 | MP1 | Fault Analysis of Switched Reluctance Motor Drives | I. Husain, M.N. Anwar |
| 1132 | MP2 | A Direct Torque Controlled Permanent Magnet Synchronous Motor Drive Without a Speed Sensor | M.F. Rahman, L. Zhong, K.W. Lim, M.A. Rahman |
| 1133 | WP1 | A Novel Single-Phase Self-Regulated Self-Excited Induction Generator Using a Three-Phase Machine | T.F. Chan, L.L. Lai |
| 1134 | TP2 | In-Wheel Permanent-Magnet Brushless D.C. Motor Drive for an Electric Bicycle | T.F. Chan, L. Yan, S. Fang |
| 1135 | MP1 | Resonance Frequencies and Mode Shapes of Switched Reluctance Motors | W. Cai, P. Pillay |
| 1136 | WP2 | Graphical and Visual Simulation of Electric Drive Systems | L.U. Gökdere, C.W. Brice |
| 1138 | TP2 | Power Cable Estimation in Long Distance Driving of Electrical Machines | E.A. Vendrusculo, J. Antenor Pomilio |
| 1139 | WO5 | Guideline for Specifying Air Cooled Combustion Turbine Generators | A.J. Spisak |
| 1140 | TP2 | Minimization of Acoustic Noise in Capacitor Motor Using Active Noise Control | N. Naoe, H. Yamada |
| 1142 | MP2 | Parameter Measurement for Synchronous Reluctance Motors Considering Stator and Rotor Iron Loss | T. Senjyu, A. Omoda, K. Uezato |
| 1143 | WO5 | Designing Large Air Cooled Generators to Overcome Traditional Obstacles | L.W. Montgomery, W.R. McCown, P.J. Karwowski, R.J. Nelson, J.P. Pipkin, F.T. Emery, B.A. Warren |
| 1145 | TO6 | Switched Reluctance and Permanent Magnet Motors Suitable for Vehicle Drives-a Comparison | A.G. Jack, B.C. Mecrow, C. Weiner |
| 1146 | MP1 | Iron Loss in Machines with Powdered Iron Stators | A.G. Jack, B.C. Mecrow, P.G. Dickinson |
| 1148 | MP1 | A Contribution to the Torque Pulsation Analysis of an Electronically Operated Permanent Magnet Motor | L. Petkovska, M. Cundev |
| 1149 | WP2 | Nonlinear Multi-Input Multi-Output Control of DC Motors in Field Weakening Region | Z.Z. Liu, F.L. Luo |
| 1152 | TO2 | Induction Motor Design for Electric Vehicle Using a Niching Genetic Algorithm | D. Cho, H. Jung, C. Lee |
| 1153 | TP2 | Core Shape Optimization for Cogging Torque Reduction of BLDC Motor | K. Han, H. Cho, D. Cho, H. Cho, H. Lee, H. Jung |
| 1154 | MP1 | Effect of Pole to Slot Number Ratio on Back-EMF Constant of BLDC Motor with Non-overlapping Stator Winding | H. Cho, H. Cho, H. Lee |
| 1155 | WP1 | Analytic and Numerical Approaches for Characteristic Analysis of Linear Ultrasonic Motor | C. Lee, S. Lee, H. Jung, J. Lee, K. Hong |
| 1156 | MO2 | Equivalent Circuit Modeling for Transient Analysis of Induction Motors with Three Dimensional Finite Elements Analysis | D. Kim, H. Jung, S. Hahn |
| 1157 | MP1 | Multisolution Optimization of Permanent Magnet Linear Synchronous Motor for High Thrust and Acceleration Operation | J. Chun, J. Lim, S. Jung, H. Jung |
| 1158 | MO1 | A Method for Initializing Induction Motors Modeling During Power System Transient Stability Studies | D. Ruiz, T. Asiain, D. Olguin |
| 1159 | TP2 | Dynamic Modeling of Universal Motors | P. Zhou, J.R. Brauer, S. Stanton, Z.J. Cendes |
| 1160 | WO2 | Dynamic Modeling of Three Phase and Single Phase Induction | P. Zhou, S. Stanton, Z.J. Cendes |
| 1161 | TO3 | Experimentation on Shaft Voltage and Neutral Current Measurements on Some Generators in EDF | J. Herigault, C. Corenwinder, A. Audoli, A. Foggia, J. Torlay |
| 1162 | TO6 | Flywheel Peak Power Buffer for Electric/Hybrid Vehicles | D. Howe, P. Mason, P.H. Mellor, K. Atallah |
| 1163 | MP1 | Rotor Loss in Permanent Magnet Brushless AC Machines | K. Atallah, D. Howe, P.H. Mellor, D.A. Stone |
| 1164 | TO5 | Robust Active Magnetic Bearing Control Using Stabilizing Dynamical Compensators | G.R. Duan, Z.Y. Wu, C.M. Bingham, D. Howe |
| 1165 | WP2 | Influence of Inaccuracies in Machine Parameterson Field-Weakening Performance of PM Brushless AC Drives | Y.S. Chen, Z.Q. Zhu, D. Howe |
| 1166 | TO1 | On-Line Optimal Field-Weakening Control of Permanent Magnet Brushless AC Drives | Y.S. Chen, Z.Q. Zhu, D. Howe |
| 1167 | TP2 | Improvements on the Induction Matrix Inversion Simplifying the use of the ABC/abc Induction Machine Model | C. Goldemberg, A. de Arruda Penteado Jr. |
| 1168 | TO5 | Estimation of Core Losses Under Sinusoidal or Non-Sinusoidal Induction by Analysis of Magnetization Rate | M.S. Lancarotte, A. de Arruda Penteado Jr. |
| 1170 | WO3 | Operating Characteristics Analysis of a New Disc Permanent Magnet Linear Synchronous Machine for the Electric Vehicle | C. Liu, J. Chen |
| 1171 | TP2 | Electromagnetic Force Analyses of a Disc Permanent Magnet Linear Synchronous Machine for Electric Vehicle Application | C. Liu, H. Pan |
| 1172 | WO3 | Decoupled Operational Behavior Studies and Three-dimensional Finite Element Analysis of a Permanent Magnet Linear Synchronous Machine | C. Liu, S. Hsu |
| 1173 | WP2 | Commissioning and Operational Experience for the 135,000 HP Adjustable Speed Drive at NASA's National Transonic Facility | J.T. Inge, G.H. Sydnor, R. Lubasch, H. Kobi, R. Bhatia, H. Krattiger |
| 1174 | TO4 | Resonant Tank Motor Model for Voltage ReflectionSimulations with PWM Drives | D. Schlegel, G. Wrate, R. Kerkman, G. Skibinski |
| 1175 | MO1 | Measurement of Reactance of Synchronous Machines at Standstill | V. Groza, M. Biriescu, G. Liuba |
| 1177 | WO4 | Synthesis of High Performance PM Motors with Concentrated Windings | J. Cros, P. Viarouge |
| 1178 | TP1 | A General Approach of Space and Time Harmonics Interactions in Induction Motors | R.B. Sti ncescu, P. Viarouge, J. Cros, I. Kamwa |
| 1179 | WO1 | Improvement of Hysteresis Control in Switched Reluctance Motor Drives | A.V. Rajarathnam, K.M. Rahman, M. Ehsani |
| 1180 | MO3 | Revision of the Criteria for Generators Specifications and Projects: the Electric Parameters and Stability-Case Analysis | A. de Arruda Penteado Jr., L. dos Reis, E. Alves, M. Uemori, N. Colombo |
| 1181 | MP2 | Harmonic Analysis of a Synchronous Machine Feeding a Non-Linear Load by a Time-Stepping Finite Element Simulation | S.I. Nabeta, A.B. Dietrich, A. Rocco |
| 1182 | MP1 | Design Aspects of 4:2 Pole - 2 Phase Switched Reluctance Motors | I.E. Chabu, S.I. Nabeta, J.R. Cardoso |
| 1183 | MP1 | The Development of a Skid-Prevented Direct Drive System for Electric Vehicles | A. Demirel, R. Tuncay |
| 1184 | WO1 | Regeneration Mechanisms in a DC Motor with an H-Bridge Inverter | T.A. Haskew, E.M. Hill |
| 1185 | WO5 | High Speed 5000 HP Superconducting Propulsion Motor for Marine Electric Drives Utilizing YBCO Field Coils | S. Kuznetsov |
| 1186 | MO3 | Acoustically-Quiet Marine Propulsion Motors with Stator Reconfiguration and Active Magnetic Balancing | S. Kuznetsov, A. Levien |
| 1188 | MO2 | Prediction of Performance Characteristics of a Universal Motor Using Parametic Finite Element Analysis | R.N. Ebben, J.R. Brauer, Z.J. Cendes, N.A. Demerdash |
| 1190 | MP1 | Nonlinear Characteristic Analysis of Interior Type Permanent Magnet Synchronous Motor | K. Kang, J. Hong, G. Kim |
| 1191 | WO5 | Asynchronized Synchronous Machine Application in the Power Systems - Operational Experience and Prospects | L.G. Mamikoniants, Y.G. Shakaran, Y.D. Vinitsky, J.M. Kauffmann, G. Barbier |
| 1193 | WO3 | Levitation and Propulsion Motion Control in a New PM LSM Controlled-Repulsive Maglev Vehicle | K. Yoshida, H. Takami, C. Jozaki, S. Kinoshita |
| 1194 | TP1 | Decoupled-Control Method of Normal and Thrust Forces in Linear Induction Motor for Maglev Vehicle Marine-Express ME01 | K. Yoshida, L. Shi, T. Yoshida |
| 1195 | MP1 | Mass-Reduction and Propulsion Control of PM-LSM Test Vehicle for Container Transportation | K. Yoshida, H. Takami, X. Kong, A. Sonoda |
| 1196 | WP2 | A Comparative Analysis of High Frequency Currents Generated by Pulsewidth Modulation Techniques | M. Cacciato, A. Consoli, G. Scarcella, A. Testa |
| 1197 | TP2 | Effects of Connection Cable Length on Conducted EMI in Electric Drives | M. Cacciato, A. Consoli, G. Scarcella, A. Testa |
| 1198 | MP1 | C.A.S. of Static Converter Using Optimisation and Symbolic Models | S. Bergeon, L. Gerbaud, J. Bigeon, F. Wurtz |
| 1199 | MO1 | Problems in Functional Analysis of Electric Drive | C. Lechevalier, L. Gerbaud, J. Bigeon |
| 1200 | MO2 | A Methodology for Using Least Squares Minimisation in Gradient Optimisation of Electrical Devices | C. Sauvey, F. Wurtz, J. Bigeon, F. Binet |
| 1201 | TP2 | A Methodology for Using Morsels Continuous Linear Functions in Gradient Optimisation of Electrical Devices | C. Sauvey, F. Wurtz, J. Bigeon, F. Binet |
| 1202 | TP2 | Design of Permanent Magnet Coupling Using the PASCOSMA Methodology | C. Coutel, P. Pandele, J. Yonnet, F. Wurtz, J. Bigeon |
| 1203 | MO1 | Re-Engineering a Motor and Drive Simulation Tool for the Advanced Consulting Environment | A.G. Levin, M.D. McCulloch, C.F. Landy, A.R. Clark |
| 1204 | MO3 | A Test Facility for Determining the Response of Industrial Equipment to Voltage Dips (SAGS) | A.K. Keus, J.M. van Coller, R.G. Koch |
| 1205 | MO3 | Analysis of Voltage Dip (Sag) Testing Results of a 15kw PWM Adjustable Speed Drive (ASD) | A.K. Keus, R.G. Abrahams, J.M. van Coller, R.G. Koch |
| 1206 | WO3 | Considerations for an Integrated Transport System Using Linear Synchronous Motors for Ultra-Deep Level Mining | V.C. Gore, R.J. Cruise, C.F. Landy |
| 1207 | TO4 | Evaluation of a Reduced Topology Phase-Converter Operating a Three-Phase Induction Motor | R.J. Cruise, C.F. Landy, M.D. McCulloch |
| 1208 | WO3 | Comparison of Force to Weight Ratios between a Single-Sided Linear Synchronous Motor and a Tubular Linear Synchronous Motor | A.W. van Zyl, C.G. Jeans, R.J. Cruise, C.F. Landy |
| 1209 | TP2 | Methods of Detent Force Reduction in Linear Synchronous Motors | C.G. Jeans, R.J. Cruise, C.F. Landy |
| 1210 | WO3 | Eddy Current Shielding and Inductive Force Characteristics of Paramagnetic Shields in Linear Synchronous Motors | C.G. Jeans, R.J. Cruise, C.F. Landy |
| 1212 | WO5 | Development of an Electromagnetic Shield Against Proximity Heating Around the Terminal Leads of a Large Hydrogenerator | K. Weeber |
| 1213 | WP1 | Stability Improvement of Vector Control System of Induction Motor without Speed Sensor Using Synchronous Current Regulator | K. Ohyama, K. Shinohara |
| 1214 | MP2 | Analysis of Permanent Magnet Linear Synchronous Motor for Servo System Using 3-D Equivalent Magnetic Circuit Network Method | I. Jung, J. Hur, D. Hyun |
| 1215 | MP1 | Analysis of Radial Force Density According to Magnetization Distribution in BLDC Motor Using 3-Dimensional Magnetic Circuit Network Method | J. Hur, I. Jung, D. Hyun |
| 1216 | TO1 | Vector Control Characteristics Analysis in Synchronous Reluctance Motor by Using Coupled FEM & Preisach Modelling and Experiments | J.H. Lee, J.C. Kim, D. Hyun |
| 1217 | WP1 | Constrained Optimisation of a Linear Actuator: Comparison of Two Methods to deal with Implicit Parameters in the Analytical Model | C. Coutel, F. Wurtz, J. Bigeon, C. Chillet |
| 1218 | WP1 | Simulation of the Starting Performance of Induction Motors on Personal Computers | S.L. Ho, H.C. Wong |
| 1220 | WO3 | Magnetic Design of Large Linear Induction Machines for EM-Catapult Duty | S. Kuznetsov |
| 1221 | WO2 | Experimental Results for Assessing Power Generation Capability of Novel Single Phase Doubly Salient PM Generator | B. Sarlioglu, T.A. Lipo |
| 1223 | MO1 | A Method for the Sensorless Determination of the Vibration Level in Inverter-Driven Induction Motors | C.M. Riley, R.R. Obaid, T.G. Habetler |
| 1224 | WO2 | A Saturating Lumped Parameter Design Model for an Interior PM Synchronous Machine | E.C. Lovelace, T.M. Jahns, J.H. Lang |
| 1225 | MP2 | An Aspect of Modelling a Permanent Magnet Motor by Using the Finite-Element Method Coupled with Circuit Equations | P.P. de Paula, S.I. Nabeta, A. Foggia |
| 1226 | TP1 | Operational Method to Deduce Equivalent Circuits in dq0 Variables | G.O. Garcia, D. Forchetti, G. Di Giannantonio |
| 1227 | WP2 | Loss Minimization in DC Motor Drives | C. De Angelo, G. Bossio, G.O. Garcia |
| 1228 | WP1 | Parallel Capacitive and Electronics Excited Stand-alone Induction Generator | R. Leidhold, G.O. Garcia |
| 1229 | MP1 | Analyses and Compensation of Rotor Position Detection Error in a Senorless PM Brushless DC Motor | J.X. Shen, K.J. Tseng |
| 1230 | WP1 | Circulating Current Analysis in the Parallel-Connected Windings of Synchronous Generators under Abnormal Operating Conditions | A. Foggia, J. Torlay, C. Corenwinder, A. Audoli, J. Herigault |
| 1231 | MP1 | Large Switched Reluctance Machines: A 1 MW Case Study | B. Fahimi, G. Suresh, M. Ehsani |
| 1232 | TP1 | Modeling and Analysis of Canned Motors for Hermetic Compressors Using Combination of 2D and 3D Finite Element Method | K. Yamazaki |
| 1233 | WP2 | Voltage Source Inverter Fault Diagnosis in Variable Speed AC Drives, by the Average Current Park's Vector Approach | A.S. Mendes, A.J. Marques Cardoso |
| 1234 | TP2 | Analysis of PM Tubular Actuators | F. Marignetti, M. Scarano |
| 1235 | WP1 | A DSP Based Field Oriented Induction Motor Control System with Fuzzy Logic Scheme | J. Hu, B.R. Duggal, D.M. Vilathgamuwa, J.X. Shen |
| 1236 | TO5 | Prediction of the Heat Transfer from the End Winding of a TEFC Strip-Wound Induction Motor | J. Mugglestone, S.J. Pickering, D. Lampard |
| 1237 | WO6 | Initial Rotor Position Detection of PMSM at Stand-Still without Rotational Transducers | D. Chung, J. Kang, S. Sul |
| 1238 | WP1 | Effective Control of Flux and Torque Hysteresis Bands for Regulation of Switching Frequency in Direct Torque Control of Induction Machine | J. Kang, D. Chung, S. Sul |
| 1239 | TO2 | A New Current Control Scheme for a 3-Level Inverter Using Neural Networks | J. Choi, I. Choy, J. Song |
| 1240 | TO3 | Application of Air-Cooled Generators to Modern Power Plants | B.E. Gott |
| 1241 | WP1 | A Genetic Algorithms Approach for Adaptive Field Oriented Control of Induction Motor Drives | L.R. Valdenebro, E. Bim |
| 1243 | TP2 | Regenerative and Plug Braking Operations of Asynchronous Drives for Electric Road Vehicles | E. Pagano, O. Veneri |
| 1244 | MP2 | Effects of the Airgap Eccentricity on the SRM Vibrations | S. Ayari, M. Besbes, M. Lecrivain, M. Gabsi |
| 1245 | MP2 | Analysis and Performance of Axial Field Switched Reluctance Generator | M. Abou-Zaid, M. EL-Attar, M. Moussa |
| 1246 | MP2 | Robust Control of Field-Oriented Drive System with Permanent-Magnet Synchronous Servomotor | I. Birou, M. Imecs, C. Rusu |
| 1247 | TP2 | Characterization of Induction Machines with a Genetic Algorithm | E.B. Souza Filho, A. Lima, C.B. Jacobina |
| 1248 | TP1 | Estimating the Parameters of Induction Machines at Standstill | C.B. Jacobina, J.E. Chaves Fl., A. Lima |
| 1249 | MP2 | Enhancing Low-Speed Performance of Hybrid Stepping Motor Servo by Ripple Canceling Technique | W.D. Chen, K.L. Yung, K.W. Cheng |
| 1250 | WP2 | A Digital Filtering Algorithm for the Simulation of DC-TO-AC Inverters | A. Hozhabri |
| 1251 | MO2 | Combined Time-Harmonic - Transient Approach to Calculate the Steady-State Behaviour of Induction Machines | R. Mertens, R. Belmans, K. Hameyer |
| 1252 | MO3 | Finite Element Modelling of Thermal Contact Resistances and Insulation Layers in Electrical Machines | J. Driesen, R. Belmans, K. Hameyer |
| 1253 | TO4 | Coupled Magneto-Thermal Simulation of Thermally Anisotropic Electrical Machines | J. Driesen, R. Belmans, K. Hameyer |
| 1254 | TO6 | Weak Coupling of Magnetic and Vibrational Analysis Using Local Forces | K. Delaere, P. Sas, R. Belmans, K. Hameyer |
| 1255 | WO5 | 150 kVA, 56000 rpm, Turbo Engine Integrated Homopolar Electrical Generator | H. Devred, M. Martinez, J. Huonic |
| 1256 | TO5 | Significance of Joints Due to Lamination Segmentation on Shaft Current in Induction Machine | R. Ong, J.H. Dymond, R.D. Findlay, B. Szabados |
| 1259 | MP2 | Mechanical Vibration and Stress Analysis of the Link of Interior Permanent Magnet type Synchronous Motor | K. Ha, J. Hong, G. Kim |
| 1260 | WP1 | Electromagnetic Radiated Emissions from Electrical Rotating Machinery | P. Ferrari, A. Mariscotti, A. Motta, P. Pozzobon |
| 1261 | MO3 | Fault Diagnosis of Electrical Machines - A Review | S. Nandi, H.A. Toliyat |
| 1262 | MP2 | Study of the Vibratory Behaviour of Synchronous Motors | C. Picod, M. Besbes, M. Gabsi, E. Pelle |
| 1263 | TO1 | Overview of Electrochemical Power Sources for Electric and Hybrid-Electric Vehicles | D.W. Dees |
| 1264 | WO1 | Evolutionary Programming Based Machine Parameters Estimation for Field Oriented Control | W.L. Chan, A. So, L.L. Lai |
| 1265 | WO4 | A Model for Magnetostriction in Coupled Nonlinear Finite Element Magneto-Elastic Problems in Electrical Machines | O. Mohammed, T. Calvert, R. McConnell |
| 1266 | TO1 | The Past, Present of Future of Electric Vehicles Development | C.C. Chan |
| 1267 | TO1 | Automotive Power Electronics - Opportunities and Challenges | X. Xu |
| 1268 | TO1 | Overview of Infrastructure for Electric Vehicles | L. Sandell |
| 1269 | TP1 | The On-Line Prediction of Airgap Eccentricity Levels in Large (MW Range) 3-Phase Induction Motors | W.T. Thomson, A. Barbour |
Back to the IEMDC99 Conference Details Home